|
|
|
Cylinder
Porting
A performance mod for your trials machine which increases
torque throughout the entire RPM range, giving your engine smoother response, more grunt, and better top end. Combine with
our cylinder head mod for the ultimate trials engine! Cylinder Head Mod
Your cylinder head is re-machined
to a new combustion chamber shape and compression ratio. This gives you more torque throughout the entire RPM range. Reed Cage Mod
Your stock reed cage is modified for more flow. Combined with our Boyesen Reeds, this mod gives a broader, smoother
power band. Don't forget your spacer kit! Use the above mods with any and all of our other engine modifications for the Ultimate Trials
Engine!
|
|
|
|
|
Universal Plastic Fenders
Available in white, red, yellow
and powder blue (not shown)
Front $30.00
Rear $36.00
|
|
|
Front Fender Bracket
Stock fender bracket for the stock monoshock fenders.
$26.95
|
|
|
Reproduction Fenders
We can
now provide a reproduction front and rear fenders for your mono shocker!!!
Front $85.00 Rear $110.00
|
|
|
Alloy Fenders
Dress up
your vintage trialer!
4" Front $80.00
5" or 6" Rear $90.00
|
|
|
Tank/Seat Unit
Save your stock seat and tank! Install our tank and
seat combo; sleek good looks and it doesn't dent as easily....Includes tank, seat, decals and petcock assembly. Uses
your stock gas cap, or we can provide a new one!
Tank/seat unit $420.00
New gas cap and
gasket $24.95
We highly recommend you coat your
new tank with our tank sealant. This protects the tank from the additives in the US fuel supply, which do not necessarily
like fiberglass. We can provide the sealant for a DIY experience or we can coat it for you.
Sealant only
$64.95
Sealant & labor $100.00
|
|
|
Replacement Seat
Replacement seat with plastic seat pan finished in red. Fits
above tank/seat unit only.
$160.00
|
|
|
Yamaha Decals
A veritable
smorgasbord of decals to choose from! Choose the typical "block" style tank decal or the scripted "pinkies"
for your mono tank/seat unit. We can also provide any of the others you see in this photo. Call for prices, but they start
at $19.95/pr.
|
|
|
Clip-on
Number Plate
Manufactured of high-quality, hard plastic impervious to gasoline and chemicals.
$20.00
|
|
|
|
|
Renthal Handlebars, 5" / 5.5" / 6"
High quality alloy braced 7/8" trials handle bars. Gun metal gray. Cross bar pad not included.
$89.95
Renthal cross bar pad available
separately
$19.95
|
|
|
Pro Taper Handlebars
High-strength
2014-T6 aerospace alloy rated at 70,000 psi ultimate strength. 1/4" cut guides for precise modivication. Knurled clutch
side for secure grip hold. Shot-peened finish to increase fatigue life. Cold-forged crossbar with stainless hardware. Includes
crossbar pad.
$64.99
|
|
|
Tomaselli Handlebars
7/8"
standard aluminum trials handlebars. Available in a very attractive blue color!
$72.00
Steel Tomaselli Handlebars
in black. Perfect for your vintage bike!
$50.00
|
|
|
Renthal Grips
Renthal grips in medium compound: $13.95
Sammy Miller
cross bar pad: $19.95
|
|
|
High quality fabrication. Unique design features easy
on and off. Fits all bars. Looks great and protects! Available in 12mm or 14mm
$20.95
|
|
|
Weld-On Folding Footpeg Kit
$80.00
|
|
|
Weld-On Footpeg Extensions
Weld these manufactured-on-site extensions
to your stock pegs for a wider area for your feet, more comfort, and better control (pegs not included).
$45.00
Send us your stock pegs and we will weld the extensions on for an additional $30.00.
|
|
|
Folding Gear Shift Lever
Replace
your stock shift lever with our folding-tip lever and have one less broken lever to worry about!
$28.95
|
|
|
Adjustable Lever Assembly
Alloy adjustable clutch lever. Forged construction in anodized silver
finish. Features 3 cable tension adjusting points; softens pull. We use it as a brake lever, too!
$28.95
|
|
|
Universal Brake & Clutch Lever Assembly
Inexpensive replacement for your stock lever assemblies. Available in black or polished finish. Not for use with
hydraulic clutch or brake systems. Available singly or in pairs.
Brake or Clutch Lever Only $11.95
Brake
& Clutch Lever, pair $21.95
|
|
|
Domino Lever Assembly, Brake or Clutch
The best quality guarantee!
Brake
or Clutch Lever Assy Only $44.00 ea
Brake and Clutch Lever Assy, Pair $80.00 pr
|
|
|
Amal-Pattern
Lever Assemblies
Aluminum levers; very forgiving and bend rather than break. Fit standard 7/8" bars. Available
separately or in a pair. Each $52.00 Pair $100.00
|
|
|
Domino Throttle Assembly
Slow- (black tube) or fast- (white tube) trials throttle
assembly.
$24.95
Replacement cable wheel or cap
$3.95 ea
|
|
|
Domino Throttle Assembly
Aluminum
tube throttle assembly (fast turn).
$49.95
|
|
|
Cables
All cables
manufactured on-site, assembled with a seven-seven strand of aircraft-grade inner cable
inside a flat-wound housing with a nylon inner sheath for maximum strength and flexibility. All throttle cables require a
Domino throttle assembly. Front brake cables may require your stock adjuster. Call for more info.
Throttle Cables (does
not include throttle assy): $28.95
Front Brake Cables: $34.95
Clutch Cables: $34.95
|
|
|
Cable Luber
Used
to inject lubricant into the cable housing. Clamps over the housing and wire, allowing an aerosol can to be connected. Once
the lube runs out the far end, the cable is lubricated.
$9.99
|
|
|
 Sprockets
Aluminum
rear sprockets in 520 chain available in 30-74T stock for 1985 is 42T, 1986 is 35T).
$58.95
Steel front sprockets, 11-17T. Stock for 1985: 12T; 1986:
10T.
$21.99 |
|
|
Heavy-Duty 520 Chains
High-quality pins, bushings and
rollers for maximum durability. Comes with one extra master link.
$42.95
Additional master link
$1.99
|
|
|
Chain Break Tool
Heat-treated, replacement
tip included. $19.95
Extra tip $2.95
|
|
|
TY250/350 Mono Shock Chain Tensioner
Comes complete with spring, arm, pad, and hardware.
$45.95
|
|
|
Chain
Lube
We recommend Silkolene Chain Lube.
This is the
first fully synthetic racing
chain lubricant for motorcycles. 14.5 oz
$11.99 Semi-synthetic Silkolene Chain Lube.
Suitable
for all types of chain including o-ring. 16 oz
$8.99
|
|
|
|
|
Magura-Style
Kill Button
Waterproof Magura-style kill button
for immediate
bike shut-off!
$10.95
|
|
|
NGK Spark Plug
Manufacturer's recommendation: B7ES
$3.15
|
|
|
NGK Spark Plug
Cap
The best one we've found! Waterproof, genuine NGK "L"-sty
|
