|
|
|
Cylinder
Porting
A performance mod for your trials machine which increases torque throughout the entire RPM range, giving
your engine smoother response, more grunt, and better top end. Combine with our cylinder head mod for the ultimate trials
engine! Cylinder Head Mod
Your cylinder head is re-machined to a new combustion chamber shape and compression
ratio. This gives you more torque throughout the entire RPM range. Crankshaft Mod
Your crankshaft is disassembled
and modified to increase crankcase compression. This ups the flow of fuel to the top end, increasing power and torque. This
would be a good time to rebuild your crank and install a new rod. Reed Cage Mod
Your stock reed cage is modified
for more flow. Combined with our Boyesen Reeds, this mod gives a broader, smoother power band. Don't forget your spacer
kit! Use the above
mods with any and all of our other engine modifications for the Ultimate Trials Engine!
|
|
|
|
|
Universal Plastic Fenders
Available in white, red, yellow
and powder blue (not shown)
Front $32.00
Rear $38.00
|
|
|
Front Fender Bracket
NEW!!! B&J -manufactured aluminum front fender brackets, available
in your choice of finish. Made from high-quality aluminum, has a significant weight difference over the steel chromed version. For use with our after-market
fenders. Also available in your choice of painted or powder-coated finish for an additional fee.  Brushed or raw aluminum finish $65.00Steel chromed Sammy
Miller bracket $72.95
Mounting hardware kit $19.95
|
|
|
Reproduction Inner Fender
Reproduction
rear inner fender for use with our universal rear fenders. Just bolt in place with the universal fender and you're good
to go!
$50.00
|
|
|
Reproduction Rear Fender
Manufactured
of an extremely pliable, flexible plastic that absorbs impact easily.
$110.00
|
|
|
Alloy Fenders
Dress up
your vintage trialer!
4" Front $80.00
5" or 6" Rear $90.00
|
|
|
Tank/Seat Unit
Save your stock seat and tank! Install our tank and
seat combo; sleek good looks and it doesn't dent as easily....Includes tank, seat, decals and petcock assembly. Uses
your stock gas cap, or we can provide a new one!
Tank/seat unit $500.00
New gas cap and
gasket $24.95
We highly recommend you coat your
new tank with our tank sealant. This protects the tank from the additives in the US fuel supply, which do not necessarily
like fiberglass. We can provide the sealant for a DIY experience or we can coat it for you.
Sealant only
$64.95
Sealant & labor $100.00
|
|
|
Replacement Seat
Manufactured as a direct replacement for your original seat.
Fibreglass base with mounting bolts; finished
in black.
$160.00
|
|
|
Tank Decals
"Block"
Yamaha tank decals; fit the after-market seat/tank unit.
$24.95/pr
|
|
|
Clip-on
Number Plate
Manufactured of high-quality, hard plastic impervious to gasoline and chemicals.
$20.00
|
|
|
|
|
Renthal Handlebars, 5" / 5.5" / 6"
High quality alloy braced 7/8" trials handle bars. Gun metal gray. Cross bar pad not included.
$89.95
Renthal cross bar pad available
separately
$15.95
|
|
|
Pro Taper Handlebars
High-strength
2014-T6 aerospace alloy rated at 70,000 psi ultimate strength. 1/4" cut guides for precise modivication. Knurled clutch
side for secure grip hold. Shot-peened finish to increase fatigue life. Cold-forged crossbar with stainless hardware. Crossbar
pad included.
$64.99
|
| |
|
|
|
Renthal Grips
Renthal grips in medium compound: $13.95
Sammy Miller
cross bar pad: $19.95
|
|
|
High quality fabrication. Unique design features easy
on and off. Fits all bars. Looks great and protects! Available in 12mm or 14mm
$20.95
|
|
|
Bolt-On Footpeg Kit
This newly-designed folding footpeg kit is 1"
lower and further back than stock, which improves your riding postition. Kit includes footpegs and all hardware. Wider
pegs mean better control and more comfort!
$140.00
|
|
|
Weld-On Footpeg Extensions
Weld these manufactured-on-site extensions
to your stock pegs for a wider area for your feet, more comfort, and better control (pegs not included).
$45.00
Send us your stock pegs and we will weld the extensions on for an additional $30.00.
|
|
|
Folding Gear Shift Lever
Replace
your stock shift lever with our folding-tip lever and have one less broken lever to worry about!
$34.95
|
|
|
Adjustable Lever Assembly
Alloy adjustable clutch lever. Forged construction in anodized silver
finish. Features 3 cable tension adjusting points; softens pull. We use it as a brake lever, too!
$28.95
|
|
|
Universal Brake & Clutch Lever Assembly
Inexpensive replacement for your stock lever assemblies. Available in black or polished finish. Not for use with
hydraulic clutch or brake systems. Available singly or in pairs.
Brake or Clutch Lever Only $11.95
Brake
& Clutch Lever, pair $21.95
|
|
|
Domino Lever Assembly, Brake or Clutch
The best quality guarantee!
Brake
or Clutch Lever Assy Only $44.00 ea
Brake and Clutch Lever Assy, Pair $80.00 pr
|
|
|
Amal-Pattern Lever Assemblies
Aluminum levers; very forgiving and bend rather than break. Fit standard 7/8" bars. Available separately or
in a pair.
$52 ea side or $100 pr
|
|
|
Domino Throttle Assembly
Slow- (black tube) or fast- (white tube) trials throttle
assembly.
$24.95
Replacement cable wheel or cap
$3.95 ea
|
|
|
Domino Throttle Assembly
Aluminum
tube throttle assembly (fast turn).
$49.95
|
|
|
Cables
All cables
manufactured on-site, assembled with a seven-seven strand of aircraft-grade inner cable
inside a flat-wound housing with a nylon inner sheath for maximum strength and flexibility. All throttle cables require a
Domino throttle assembly. Front brake cables may require your stock adjuster. Call for more info.
Throttle Cables (does
not include throttle assy): $28.95
Front Brake Cables: $34.95
Clutch Cables: $34.95
|
|
|
Cable Luber
Used
to inject lubricant into the cable housing. Clamps over the housing and wire, allowing an aerosol can to be connected. Once
the lube runs out the far end, the cable is lubricated.
$9.99
|
|
|
 Aluminum Sprockets
Rear
sprockets. We stock 51t but can get the size you want!
$72.95Front sprockets, 12-15T
$19.95
|
Chain, 428 Heavy Duty
110 Link Heavy Duty
Chain
 with extra master link
$37.95 Additional master link
$1.99
|
|
|
Chain Break Tool
Heat-treated, replacement
tip included. $19.95
Extra tip $2.95
|
|
|
TY175 Chain Tensioner
Comes complete
with spring, arm, pad, and hardware.
$44.95
|
|
|
Chain
Lube
We recommend Silkolene Chain Lube.
This is the
first fully synthetic racing
chain lubricant for motorcycles. 14.5 oz
$11.99 Semi-synthetic Silkolene Chain Lube.
Suitable
for all types of chain including o-ring. 16 oz
$8.99
|
|
|
|
|
OEM Points &
Condenser Points
$33.95
Condenser $15.95
|
|
|
TY175 Electronic
Ignition B&J's electronic ignition for the TY175 offers an advance curve that allows the engine
to produce more torque and higher RPM, which in turn offers better traction and helps you achieve a lower score. All this,
without points! What more could you ask? Includes on-site machined backing plate and all ignition parts, mounting hardware,
NGK spark plug, a high-quality waterproof spark plug cap, installation instructions and a timing chart.
$450.00
|
|
|
YZ-Style Kill
Button
Waterproof kill button for immediate bike shut-off!
$15.95
|
|
|
NGK Spark Plug
Manufacturer's recommendation: B7ES
$3.15
|
